A case study each day: practical process sharing
2024/12/3
Louis Vuitton monogram PVC crack repair
1. Cleaning: Use pump-foam Leather Stain Cleaner to clean dirt from the crack surfaces.
2. Bonding: After air drying, use a toothpick to apply PVC-Specific Adhesive little by little to both sides inside a crack. Press and hold the crack together with tweezers or fingernails for about 1 minute before releasing.
3. Bonding essentials: If there are many cracks, work through them one at a time and allow enough holding time. Do not coat all cracks in adhesive first and then press them together. The first bond gives the best adhesion; residual glue greatly reduces the effect.
4. Recolouring: Once the bond is secure, tint Luxury Super Repair and Recolouring Agent for areas needing filling or repair. Use it for filling first. If hand application or spraying is needed, dilute with High-Strength Colouring Resin for better adhesion.
5. Colour fixing: A light spray of Matte Fixative can give a more natural appearance.
Watch the video for this process
Louis Vuitton monogram PVC crack repair
Scan the original QR code with WeChat to watch the video for this case.
On a phone, save the QR image, then select it from your album in WeChat Scan.
Understand the sequence and decisions
Additional explanations based on this case’s original record.
Bond cracks one by one before any necessary filling and recolouring.
Bond cracks individually
The source requires one-at-a-time work and explains the effect of residual glue. Sequence and holding time are part of the method.
Source reference：Bonding; bonding essentialsSecure bonding precedes filling and colouring
The source makes a firm bond the prerequisite. Joining the crack and restoring its appearance are not one action.
Source reference：RecolouringAdjust concentration for the application method
Filling is separate from hand application and spraying; dilution is specified for the latter two. Return to the corresponding instruction when the use changes.
Source reference：RecolouringQuestions and answers
Can all cracks be coated in glue before pressing?
The source explicitly advises against this. Treat each crack in sequence and give it enough holding time.